New Features and Bug Fixes
|
Jira Story |
Description |
|
When cloning white or varnish channels, disabling one of the channels will no longer prevent all cloned separations from printing, instead only the disabled channels will be excluded. |
|
|
Enable RIP Ahead to work with Duplex jobs. |
|
|
Added an OPCUA node to SMM to cover Media Setup pane. |
|
|
Added an OPCUA node to cover the settings in the preferences dialog. |
|
|
Add an OPCUA node to expose the Screen setup dialog. |
|
|
Job editor now allows you to change the tone curves. They are loaded from the media and are instered into the job. This functionality is off by default and is controlled by an OPCUA switch called "AllowToneCurveEditing". |
|
|
Allow tone curves to be attached to specific jobs via OPCUA. |
|
|
Clearly indicate when CPIM is being used (Blue traffic light). |
|
|
**MAKOSUP-117:** Allow the operator to see which colour spaces was edited (Device or Lab). |
|
|
**SDFESUP-152:** Expose the ability via OPCUA to RIP a job ahead and remove the RIP Ahead. |
|
|
Now when you send a job to rip ahead, you will now get a progress bar that shows you, when it has started, when it is done and how far along it is. |
|
|
**SDFESUP-187:** Remove spaces at the end of media names. |
|
|
Print SMM targets using the OPCUA interface. |
|
|
Add an OPCUA interface for Import Targets functionality. |
|
|
**SDFESUP-198:** When you change the process space we should also update the ICC profiles. |
|
|
Lifted the limit on the number of patches allowed in the Spot Variation charts (was fixed to 255) |
|
|
**SDFESUP-195:** Fixed a bug that would lock up SPC if printing with SMM and Meteor took too long. Instead of locking up SMM may fail to change active media, requiring an Apply after the print run is finished. |
|
|
**SDFESUP-194:** Fixed error in drop level mixing. |
|
|
Print Duplex jobs with Harlequin GPU RIP. |
|
|
**SDFESUP-201:** Enforce 1 as the minimum on the copy count. |
|
|
**SDFESUP-201:** Licenses are now stored in a non-user specific location, so if an app is licensed on a machine it can be used by any user on that machine. |
|
|
SmartRIP automatically use the active Meteor confg. |
|
|
SmartRIP now uses the Apex Renderer by default. |
|
|
Fix: When trying to print a static job with or without copies, the job will never report success. |
|
|
Swich SmartRIP to use Harlequin GPU RIP only. |
|
|
Add the ability in SmartRIP to call PrintPage again before the last PrintPage has finished. |
|
|
Add the ability to run two SmartRIPs on the same PC. |
|
|
Two servers can now be specified on the same machine that SPC is running on (127.0.0.1). Local servers that are not the installed one are no longer supported. |
|
|
OPC node name changed from 'ColorOverride' to 'RIPSetup' to match the pane name. Any OPC calls will need updaiting to match, or they won't work. |
|
|
**SDFESUP-149:** There is a new node under App called "BringJobEditorToFront" which will force job editor to come to the front. This will bring it out of minimised and in front of any apps, including third-party apps, i.e. Google Chrome. |
|
|
Measure tool is not translated in all languages. As of right now we have English, German, Chinese and Japanese. Other translations will come later. |
|
|
Add an OPCUA interface to the Linearisation pane. |
|
|
Add an OPCUA interface to the Total Ink Limit pane. |
|
|
**SDFESUP-251:** Colour Management off is bot retained when saving and SDC. |
|
|
Extend Media Bridge in SmartRIP to support multiple SmartRIPs end points. |
|
|
Add the ability to disable Pre-Processors. |
|
|
**SDFESUP-251:** Add the ability to support images from cameras when creating PrintFlat calibrations. |
|
|
Fixed bug that caused incorrect warnings about failing to restore the active media after printing a target from SMM. |
|
|
In version 5.5, fixed an issue where jobs may become significantly larger in size after being preprocessed. |
|
|
Increased the number of colors in a job that can be printed when not using the GPU. |
|
|
Stop DLLs from inside being installed over the new new DLLs supplied with a release. |
|
|
**SDFESUP-251:** Use Device link to support keep 100% black for CMYK output. |
|
|
Waiting queue thumbnail will now react to the tone curves. |
|
|
**MAKOSUP-118:** Use OPC UA LoadJobFileChunk in SMM for test chart printing. |
|
|
**SDFESUP-252:** The level of precision has been made consistent in Label Studio with 2 decimal points. Also fixed an issue where the value shown is rounded but the value used is not. |
|
|
Compress the SetupPS so that more NamedColors can fit in the job while still printing successfully. |
|
|
**SDFESUP-252:** Feature Request - Show Pages and Total Job Length in Standard Waiting Queue. |
|
|
Add support for using Job-based Tone Curves in printing. |
|
|
**SDFESUP-253:** Improve job progress reporting for long running jobs. |
|
|
Fix: Drop level overlap get lost on SMD reopen. |
|
|
**MAKOSUP-118:** Fix: SMM prints the "after" linearization with not linearization at all. |
|
|
Add the ability via OPC UA to take external PrintFlat calibration images. |
|
|
**SDFESUP-252:** Job Cost Calculator - Duplicate White For for a single model of press. |
|
|
Fixed a bug where job editor would revert to using CMYK when using an extended gamut media. |
|
|
Fix: CustomPreProcessor failure. |
|
|
**SDFESUP-252:** Added a new toggleable preprocessor that attempts to optimize the page tree structure of submitted PDFs to ensure some long jobs don't slow down the longer they print. |
|
|
SDFE-3720 |
SDFESUP-197: Fix issue using a customer plugin with LiLo pages from Label Studio |
Known Limitations
-
This release is still under a Beta program and therefore can be evaluated but not put into produciton.