New Features and Bug Fixes
|
Jira Story |
Description |
|
When printing, the only separations produced will be for the inks that both appear in the active media and are enabled on the server. |
|
|
Added an option to enable Intelligent Thumbnailing, which will cause all job thumbnails to generate from the middle of the job rather than the first page. |
|
|
The Duplicate job dialog now has a cancel button. |
|
|
English (U.K.) added as a language choice to Smart Print Controller. SPC's selected language and length units dictate the language and length units shown in Job Editor. |
|
|
The Web View pane's default web page is now the Smart DFE documentation page. |
|
|
Jobs can now be renamed through the job details dialog or through OPC. |
|
|
Adjusted the color scheme slightly so that the caret symbol in editable text fields is more visible. |
|
|
SDFESUP-405: Added a button to Job Editor to toggle between Selection Mode and Panning Mode. |
|
|
SDFESUP-411: It is now possible to select multiple jobs and move them to other queues. |
|
|
SDFESUP-451: Added a new GetEEPROM method to the Meteor OPC interface to get EEPROM data from a given Print Head. |
|
|
The active media is now shown at the top of the application, and below that is a display of all the active inks for the currently applied settings. |
|
|
SDFESUP-503: Deleting all jobs from the Completed Queue will now prompt for confirmation. |
|
|
Smart Font Scan added to the list of Engineer pane Settings. This option will alter the methods used to detect non-embedded fonts in jobs. |
|
|
|
|
The Setup pane Print Bars tab has been renamed to RIP Servers to better represent the settings in the tab. The Print Mode settings have been moved from the Setup pane General tab to the RIP Servers tab, and the Print Mode option for RIP Direct is visible when Offline mode is not supported in the printer profile. The Media details were removed from the RIP Servers tab. |
|
|
The Save and Load Settings are no longer accessible outside the Engineer Pane. |
|
|
The color management view previously in the Setup pane has been moved to the Engineer -> Media pane. |
|
|
The Sheet Markup tab in the Setup pane is now the Control Marks tab. The Control Marks tab is only visible if the Print Marks plugin is present in the plugins pipeline. |
|
|
When deleting a job, a confirmation dialog will be shown. |
|
|
The Engineer pane Status tab has been removed. The Total Printed Sheets counter and Reset button have been moved to the Settings tab, and they are disabled if the Sheet Counter isn't enabled in the active config. |
|
|
Setup -> General tab has been removed, and its contents redistributed. |
|
|
Double-clicking a job in any of the queues will open the job details dialog. Double-clicking on a text box will not open the job details dialog, as you may want to highlight text. The Job details button is visible in the Print Queue. |
|
|
Added confirmation dialogs to the removal of Servers and Media. |
|
|
SDFESUP-529: The Active Media can now be set to match a job's Target Media via the job details dialog, or the maximized Waiting Queue. |
|
|
Fixed a bug where SPC would crash on trying to create a compatible media for an invalid printer profile. |
|
|
Chinese translations added to Job Cost Estimator; the language of Job Cost Estimator is decided by the machine's system locale at startup. |
|
|
Added a Disabled Ink Mode option to the printer profile that determines whether inks that don't appear in the media are blank or produce no separations. |
|
|
Jobs can be made LILO jobs via |
|
|
Printing LILO jobs will print additional pages based on the set counts for the Lead In page and the Lead Out page. |
|
|
Added a new type of folder, the Pre-Press Folder, to support sending jobs to external applications for further adjustments before printing. |
|
|
Allow the user to cancel a print from Smart Calibrator. |
|
|
Bug Fix : Make a PDF with number of pages in rather than send multiple print jobs. |
|
|
SDFESUP-398: Import the new spot color editing functionality from SMC into SMM
|
|
|
Bug Fix : ScreenPro Lab crashes with invalid composite tif. |
|
|
Bug Fix : Error re-combining screened separations to composite TIFF. |
|
|
Bug Fix : ScreenPro Lab does not screen images correctly/crashes if the image already exists in the Completed folder. |
|
|
SMM - Create Nozzle compensation Dialogue. |
|
|
SMM - Create the Nozzle Compensation Curve. |
|
|
Add 3D view using the profile created from earlier step and pin selected color in the 3D view. |
|
|
Spot color editing - Ability to set preferences - delta E and tolerance. |
|
|
Calibrator: support CxF X-4 to import color libraries into SmartDFE |
|
|
I would like the spot colour editor functionality in Calibrator. |
|
|
SMM crash at Step 5a : Print Gray Balance Target |
|
|
Allow the user to cancel jobs from Smart Media Manager. |
|
|
Change the printrun.config 'Available Media' to 'AvailableMedia'. |
|
|
SPC - Provide a way for a user to define Spot colours to be ignored.
|
|
|
When a job has a Target Media assigned to it, and that media includes a TCB file, this should initiate a preprocessing step in the Waiting Queue. This step will replace any spot colors in the job that are specified in the TCB file within the target med |
|
|
SMM crash in Nozzle Compensation Dialogue. |
|
|
The thumbnail should be updated to reflect any color changes made through a new preprocessing step, which is capable of replacing the values of spot colors in the job found in the TCB inside the SMD. |
|
|
Color Override stage is integrated into the workflow, easily accessible via a button under the Characterizarion stage. |
|
|
SMM - Spot Color Editor Stage. |
|
|
The "ExportSMD" button is available at the bottom of every pane. |
|
|
SWF-2 |
Run Task Fails when Rerun VDP Jobs |
|
SWF-85 |
Task Dialog Boxes have white space |
|
SWF-91 |
Add Margin Option (Left, Right, X and Y), default 0 with option to add margins to S&R; location after gap size |
|
SWF-106 |
CLOUDFLOW: When Submission is enabled, submitting a new job always results in an error |
|
SWF-145 |
34 > Job Task History > Save Task Settings |
|
SWF-154 |
A6 Add Margins option to the S&R |
|
SWF-165 |
40. PP – Manage Colours |
|
SWF-176 |
Documentation Update - Bugatti |
|
SWF-181 |
R3 - VDP Step and Repeat |
|
SWF-186 |
57 - PP – Manage Document - Duplicate |
|
SWF-187 |
43/44 - Remove References |
|
SWF-188 |
46 - Job Station Centre Justify Column info |
|
SWF-189 |
47 - Job Station Changes |
|
SWF-190 |
47 - Job Station Changes - Preflight Status |
|
SWF-195 |
Hotfolder Creation Issue |
|
SWF-203 |
Remove LILO.json from Fave Task |
|
SWF-204 |
Tooltips in wrong position |
|
SWF-205 |
Update Icons / Headings |
|
SWF-206 |
Misspelling of 'System' on Job Station |
|
SWF-207 |
Using Fave Settings to Remove Diecut on different Color Jobs |
|
SWF-208 |
Update Core CF 23.09.00 |
|
SWF-210 |
Tooltip Updates |
|
SWF-212 |
Change colour book selection to SMD selection in Manage Inks |
|
SWF-214 |
v2.7.69 - Static Step And Repeat Task Not Always Honouring Width And Length Settings |
|
SWF-229 |
v2.0.8: Depending on the locale, the output format of the preflight report may be RTF format or text format |
|
SWF-231 |
v2.7.69 - Set Sheet Width To Zero By Default In Send To Print Queue |
|
SWF-236 |
v2.1.16: CLOUDFLOW Incorrect Page Range display in Failed Jobs list when creating a new job with an incorrect page range specification in the preparation queue |
|
SWF-238 |
v2.1.16: CLOUDFLOW Locale Japanese Only: Some UI is displayed in English |
|
SWF-239 |
v2.0.7: Request to change the output format of the preflight report |
|
SWF-241 |
Consistent Spelling Of Colour/Color |
|
SWF-242 |
Not showing dynamic preflight results if more than one page is preflighted |
|
SWF-243 |
Feature Request - Button To Send Jobs To CloudFlow Job Station From Waiting Queue In ColourFlow UI |
|
SWF-244 |
SWF - Chinese Locale Update |
|
SWF-245 |
When importing a job copies required should default to 1 |
|
SWF-247 |
Create Default Hotfolder on Install |
|
SWF-251 |
Check Chinese Locale Translations |
|
SWF-252 |
LILO revamp |
|
SWF-253 |
Unable to Upload PDF and CSV file together in CSV Mode |
|
SWF-263 |
v2.7.74 - Prepare Function Not Active Following Bypass Preflight |
|
SWF-264 |
092 : SPC is not picking up the job in the waiting queue from SWF it consuming the .complete though |
|
SWF-265 |
The saving of settings, this was observed and tracked down to instances where more than one task was done |
|
SWF-266 |
SPC not processing the .complete / .pdf correctly and the .pdf not appearing in the SPC queue |
|
SWF-268 |
v2.7.82 - Job Fails Import Into File Preparation Queue |
|
SWF-269 |
Jobs via New Preflight Job with Favourite not appearing in Job Preparation Queue |
|
SWF-270 |
Jobs via ChainHotfolder not appearing in Job Preparation Queue |
|
SWF-274 |
Job Station only Tooltip |
|
SWF-275 |
Need a mechanism to create hot folders from within a Mars application |
|
SWF-279 |
v2.7.22 CLOUDFLOW: It does not limit even if a paper size larger than the maximum value specified for PrintSizeH and PrintSizeV in FundamentalsCustom.json is specified. |
|
SWF-281 |
Check Japanese Locale Translations |
|
SWF-284 |
Add New Translation json Files to Builds |
|
SWF-286 |
Default Hotfolder Path |
|
SWF-291 |
File Preparation Queue - Downloading Log Files |
|
SWF-292 |
Job Task History Live - Download Log Files |
|
SWF-293 |
Wrong Heading In File Preparation Queue |
|
SWF-246 |
Dynamic Preflight Pages not displayed correctly in PS |
|
SWF-256 |
Tooltips On Job Sending Page Icons |
|
SWF-267 |
Login Screen not displayed correctly |
Known Limitations
In the Job Editor's Custom Color Editor, when you modify a color, the system will generate a new media file. This new file is a duplicate of the original target media, but with the adjusted color values that the user has specified. This ensures that the color's name remains consistent, and the original color values are retained in the original media for any potential reprinting needs.