SmartDFE v4.10 Release Notes

Jira Story

Description

*SDFESUP-1200:*  Export multiple jobs from the Waiting and Completed queues and then reimport at a later date.

*SDFESUP-1025:* Access the Meteor print error log over OPC.

*SDFESUP-952:* Moved the external control toggle to be in the context menu of the OPC UA server icon. 

*SDFESUP-917:* The UI of the Meteor Plugin now has additional elements that represent the state of the IsRouterConnected OPC flag.

*SDFESUP-964:* Jobs can be rotated immediately upon submission via the .complete mechanism by 90, 180, or 270 degrees clockwise.

Colour the Tone Curve charts to match the RGB value for the INK colour.

New feature: SPC - Add "Select All" button the queues screen and OPCUA.

Job Editor has been restyled to be more visually consistent with SPC

*SDFESUP-608:* Fixed issue where the PrintCount node on the Meteor OPC tree sometimes did not update when it should have.

*SDFESUP-1009:* Fixed a bug causing loading an SDC containing a renamed selected media to cause the default SDC on restarting SPC. Fixed an issue causing the selected media to be changed to a different media on renaming.

SJCE is now compatible with style files produced by style customizer.

Job Editor will now be styled alongside SPC.

*SDFESUP-1042:* Added AllJobs.SendToJobEditor method to allow remotely opening Job Editor on a job. This follows the same rules as when opening Job Editor through the UI.

New Feature: Hot folder support has been added to the Pre-Press plugin.

Add a switch in settings that shows and hides the Press Emulator. This has also added a new plugin visibility pane in the Engineer area.

*SDFESUP-1028:*  Issue due to error connecting to one of the SPCHD meteor servers.

The Print Speed Indicator is now always visible for all Waiting Queue jobs; and will be set to Green if the job is CPIM compatible.

*SDFESUP-1072:* Changed the name of the GTJ thumbnail to include ".thumbnail" after the job name.

*SDFESUP-1199:* Added progress and feedback to loading a Smart Device Config (SDC)

*SDFESUP-1099:* Character corruption happens on Alberti plugin.

*SDFESUP-1076:* and *SDFESUP-1106:* Use switch between the Main RIP and Service RIP on a single PC.

New Feature: Add "Move Selected" button to the queues screen and OPCUA.

New Feature: Add a "Delete Selected" button to the queues screen and OPCUA.

*SDFESUP-1100:* Added a button and an OPC method to change the target media of selected jobs in the waiting queue.

*SDFESUP-1112:* Add OPCUA command monitoring for "fail status".

*SDFESUP-1125:* and *SDFESUP-1059:* Job cost estimation has been made more robust with regards to the setup of colorants and plane numbers.

*SDFESUP-1137:* Fixed a potential bug that could cause a crash on loading an SDC with Meteor configs.

New OPC method (SetValuesViaJson), allows Meteor param, paramEx and signals to be set via this method.
The file should be on the server before the call is made.

*SDFESUP-960:* We have added a new "RIP Ahead" feature to waiting queue. This can be selected on a job by job basis. 

Loading a device in Integrated Mode SJCE is no longer possible.

*SDFESUP-1133:* Fixed the reading of the Screener configuration xml so that if the xml file no longer exists, the default settings will be applied instead.

Added a button to the Job Details dialog to allow a RIP Ahead job to be reverted to its previous state.

*SDFESUP-1190:* It is now possible to set server config files and Meteor config files over OPC for RIP Direct configurations.

The integrated JCE icon has now changed to a "$".

When using the RIPServer on the same PC as the SPC give Watchdog sole control over starting and stopping the RIPServer. Remote servers still use the start script.

Improve the loading of SPC UI plugins.

Increase SPC logging when Engineer->Allow Extended Logging is enabled.

*SDFESUP - 867: *
* Integrate HHR 13.6r2c.
* Fixed an issue where very tall jobs would have rendered bands in the wrong position on the page.
* Fixed an issue with rip ahead jobs, that fail to submit, were not following the correct error and abort process. 

*SDFESUP-1241:* Increased the maximum limit for the Cost Per Litre field in SJCE and SPC to 999,999.99.

*SDFESUP-1096:* Improvements in PrintFlat processing. 

Create a OPC Server in SMM

Load SMD into SMM

Add basic functionality to override ICC Profiles via OPCUA.

Add the ability to Update an SMD from SMM Via OPCUA.

Add the ability to Export an SMD from SMM Via OPCUA.

Access the "Color Override" Functionality via OPCUA.

Create a test app that can interact with the new OPCUA server in SMM. 

Implement "External Control" feature in SMM for OPCUA.

*SDFESUP-1132:* generate a test PrintFlat calibration with watermarks

Added a debug mode for PrintFlat in SMM.

*SDFESUP-748:* Normalise the PrintFlat scans before recombining.

Added PrintFlat Configuration UI and Settings.

*SDFESUP-1171:* In SMM make the SMD selectable in End User Mode

*SDFESUP-1172:* SMM - Make the Media Name and Description editable.

*SDFESUP-1174:* Override colour options - need the device links displayed.

*SDFESUP-1165:* Fixed PrintFlat Target overlap at 800mm.

Added hybrid PrintFlat and Linearisation feature in SMM.

In SMM make the SMD selectable in OEM mode

In SMM make the SMD selectable over OPCUA.

*SDFESUP-1175:* Job Editor Using Incorrect Input Lab Values For Spot Inks (CMYK).

*SDFESUP-1203*: Added solid line as cutting line option in PrintFlat scanning targets

*SDFESUP-1205:* Job editor not saving colour changes to job.