This page applies to Harlequin v13.1r0 and later; both Harlequin Core and Harlequin MultiRIP.
We recommend that you check that the LDK daemons are running on Linux using:
sudo /etc/init.d/aksusbd status
which should report:
AKSUSB daemon is running!
WINEHASP daemon is running!
HASPLM daemon is running!
If they are not started, start them using:
sudo /etc/init.d/aksusbd start
You can stop them using:
sudo /etc/init.d/aksusbd stop
The Admin Control Center (ACC) is only available when the Linux daemon is running.
To install the LDK run-time on Linux open a terminal window, make yourself superuser and go to:
<HHR install path>/ldk
This is usually:
/usr/local/bin/<HHR_13xrx_xxx>/ldk
or:
/u/<name>/<HHR_13xrx_xxx>/ldk
-
Copy /ldk/haspvlib_109670.so to /var/hasplm/haspvlib_109670.so.
-
Use the following to install the runtime:
rpm -i aksusbd-n.n-n.i386.rpm
(replace the n characters to match the version present).
A message appears, stating that the runtime is installed or a package is already installed.
GGSL recommends using the latest LDK runtimes, which are available on the GGSL ftp site.